Address: Bowang Economic Development Zone, Ma 'anshan City, Anhui Province
Phone: 13905558832
Telephone: 0555-6762999
Fax: 0555-6761884
Email address: linda@chinachenxing.cn
matt@china-chenxing.com
Company News
contact
Address: Bowang Economic Development Zone, Ma 'anshan City, Anhui Province
Phone: 13905558832
Telephone: 0555-6762999
Fax: 0555-6761884
Email address: linda@chinachenxing.cn
matt@china-chenxing.com
First, domestic and imported CNC turret punch can be divided into four categories;
Thick tower type: Yangli, Jin Fangyuanxin, Ya Wei, Jimai, Huili, Datong, Tailifu, AMADA, Finland, and other domestic CNC turret punch.
Thin tower class: Jin Fang Yuan old, yellow forging and Japan Amada part.
Murata type: Murata Muratec CNC press, this kind of press is a special mold.
Block class: Germany block CNC punch, Hakko CNC punch.
Two, the type of turret punch mold is divided into:
There are four kinds of thick turret mould, thin turret mould, Germany's TURM mould and Japan's MURATEC mould, and the corresponding CNC punch is shown above.
Three, mold structure classification:
1, thick turret mould: thick tower mould can be divided into: standard structure (85 structure), Wilson90 structure, air blown structure, economic structure and heavy load structure, etc.
2. Thin turret mould: thin turret structure is divided into: gold square and circle standard structure, WILSON80 structure, 90 structure, 5/8 insert structure, etc.
3. Murata mold: Murata mechanism is divided into two categories: Murata 114 structure and Vulcan structure.
4, through the mold: through the mold has only one structure, that is, through the mold type.
IV. Division of mold station:
1, thick tower: according to the size of the mold is divided into five stations: A, B, C, D, E.
A station mold (1/2 ") diameter 0-- 12.7mm
B Workstation mold (1-1/4") diameter 12.8-- 31.7mm
The diameter of C station is 30.8-- 50.8mm
D station mold (3-1/2") diameter of 50.9-- 88.9mm
The mould for the E station (4-1/2") has a diameter of 89 --114.3mm
2. Thin Tower:
B Workstation mold (1-1/4") diameter 1.0-- 31.7mm
D station mold (3-1/2") diameter 30.8-- 88.9mm
3. Murata Block: Please refer to the information of Haornaisi for details.
V. Mold shape code:
Ro -- Round Re -- Square Sq -- Square OB Long circle SD -- Single D DD -- Double D LD-- Long D ET-- Square Triangle HX -- Regular Hexagon OT -- Regular Octagon SP -- Special
VI. Mold Structure Composition:
The whole set of mold, upper mold combination, lower mold, punch, guide sleeve, hitting head, stop ring, spring.
VII. Mold installation size standard:
Thick tower
1. The standard height of upper die assembly at station A and B is 209.5mm.
2. The standard height of upper die assembly at C station is 209mm.
3. The standard height of upper die combination at station D and E is 211mm.
4, ABCDE all lower die height is 30mm.
Thin tower:
1. The standard height of upper die assembly at station B is 140mm.
2. The standard height of upper die assembly at D station is 141mm.
3. The lower die height of B is 30mm.
4. D lower die height is 22mm.
See the information of Haonaisi for details.
Mold marking, packaging, transportation and storage
1. Logo and logo:
The marks of die punch, lower die and guide sleeve should be clear and even, and laser marking should be adopted, such as punch -HONIS RO7, lower die -HONIS RO7+0.3, etc.
2. Packaging and transportation:
The mold in the factory and in transit should be anti rust, anti moisture, anti bump treatment.
The next:CNC turret punch mold knowledge
Related Hot Products
Address: Bowang Economic Development Zone, Ma 'anshan City, Anhui Province
Phone: 13905558832
Telephone: 0555-6762999
Fax: 0555-6761884
Email address: linda@chinachenxing.cn
matt@china-chenxing.com
? All rights reserved:Ma anshan Chenxing Machinery Manufacturing Co. Ltd For the record, Technical support: Chenguang network